Installation Manual

7106508315 REV1.0.0

Note: For simplicity, we will take LS1008G for example throughout this Guide.

Connection

Router

LAN PortWAN Port

Internet

Power Adapter

LS1008G

Ethernet Ports (1-8)Power LED

5/8-Port Gigabit Desktop Switch

Installation Guide

LS1005G/LS1008G

LED Explanation

Link/Act

Link/Act (Green)

On:

Running at 10/100/1000 Mbps

Flashing: Transmitting/receiving data

O:

No device is linked to the

corresponding port

On: Power on

O: Power o

Power

PAGE 1
LS1005G/LS1008G On: Power on Off: Power off REV1.0.0 5/8-Port Gigabit Desktop Switch Power 7106508315 Installation Guide © 2019 TP-Link LED Explanation Link/Act Link/Act (Green) On: Running at 10/100/1000 Mbps Off: No device is linked to the corresponding port Flashing: Transmitting/receiving data Note: For simplicity, we will take LS1008G for example throughout this Guide.
PAGE 2
Frequently Asked Questions (FAQ) Q1. The Power LED is not lit. Q2. The Link/Act LED is not lit when a device is connected to the corresponding port. The Power LED should be lit when the power system is working normally. If the Power LED is not lit, check as follows: It is recommended that you check the following items: A1: Make sure the power adapter is connected to the switch with power source properly.
PAGE 3
FCC compliance information statement Product Name: 5/8-Port Gigabit Desktop Switch Model Number: LS1005G/LS1008G Component Name Model I.T.E. Power Supply T050060-2B1 (For LS1005G) T090060-2B1 (For LS1008G) Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.