Datasheet Media Converters & Chassis MC200CM MC210CS MC112CS TL-MC1400 MC220L MC111CS MC100CM MC110CS Overview The Chassis-based Media Converters include a number of independent media converters and a chassis capable of housing up to 14 media converters. You can start with single media converters, each equipped with its own housing and AC power adapter.
TL-MC1400 14-Slot Rackmount Chassis The TL-MC1400 14-Slot Rackmount Chassis is specially designed for accommodating chassis-based Media Converters. It is a standard 19-inch 2U height rackmount chassis which can be suitably mounted in the standard 19-inch rack. The chassis lets you install multiple media converters in an equipment rack together with the network devices for which they provide media conversion. This provides for space saving, and the cabling will look neat.
MC200CM The MC200CM media converter converts 1000BASE-SX fiber to 1000Base-T copper media or vice versa. It is designed for use with 850nm multi-mode fiber cable utilizing the SC-Type connector, transmitting data up to 0.55 kilometers away. What's more, MC200CM can work as a stand alone device (no chassis required) or with TP-LINK´s 19” system chassis.
MC210CS The MC210CS media converter converts 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. It is designed for use with 1310nm single-mode fiber cable utilizing the SC-Type connector, transmitting data up to 15 kilometers. What's more, MC210CS can work as a stand alone device (no chassis required) or with TP-LINK’s 19” system chassis.
MC220L The MC220L converts 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. It is designed for use with 850nm multi-mode/1310nm single-mode/WDM fiber cable utilizing the LC-Type connector, transmitting data up to 0.55 kilometers or 10 kilometers. What's more, MC220L can work as a stand alone device (no chassis required) or with TP-LINK’s 19” system chassis.
MC100CM The MC100CM media converter converts 100BASE-FX fiber to 100Base-TX copper media or vice versa. It is designed for use with 1310nm multi-mode fiber cable utilizing the SC-Type connector, transmitting data up to 2 kilometers. What's more, MC100CM can work as a stand alone device (no chassis required)or with TP-LINK’s 19’’ system chassis, and is equipped with Link Fault Pass Through which minimizes the loss caused by link failure.
MC110CS The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. It’s designed for use with single-mode fiber cable utilizing the SC-Type connector, transmitting data up to 20 kilometers. What’s more, MC110CS can work as a stand alone device (no chassis required) or with TP-LINK’s 19’’ system chassis, and is equipped with Link Fault Pass Through which minimizes the loss caused by link failure.
MC111CS The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. It’s designed for use with single-mode fiber cable utilizing the SC-Type connector. Adopting WDM technology, MC111CS takes only one fiber to transmit and receive data, which saves you half of the cabling cost. On this fiber, it works at 1550nm on transferring data and at 1310nm on receiving data.
MC112CS The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. It’s designed for use with single-mode fiber cable utilizing the SC-Type connector. Adopting WDM technology, MC112CS takes only one fiber to transmit and receive data, which saves you half of the cabling cost. On this fiber, it works at 1310nm on transferring data and at 1550nm on receiving data.
More information of the 100Mbps series Media Converter Type Connector Transmission Distance Transmission Media Wave Length MC100CM RJ45--SC 2km Multi-mode Fiber,TP 1310nm MC110CS RJ45--SC 20km Single-mode Fiber,TP 1310nm MC111CS RJ45--SC 20km Single-mode Fiber,TP 1550nmTX/1310nmRX MC112CS RJ45--SC 20km Single-mode Fiber,TP 1310nmTX/1550nmRX More information of the 1000Mbps series Media Converter Model NO.
