Datasheet

www.tp-link.com
Page 5
Features:
Specifications:
Standards
Basic Function
Wave Length
Interface
Network Media
LED Indicators
Certications
Dimensions (W x D x H)
Environment
Power Supply
IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
Full Duplex Flow Control (IEEE 802.3x)
Extends ber distance up to 10km
Depend on the used SFP module
1 SFP port
1 1000Mbps RJ45 port (Auto MDI/MDIX)
1000BASE-T: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
1000BASE-FX: Multi-mode Fiber
PWR, LINK, RX
FCC, CE
3.7 x 2.9 x 1.1 in. (94.5 x 73.0 x 27.0 mm)
Operating Temperature: 0°C~40°C (32°F~104°F)
Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
External Power Adapter, 9V/0.6A or 5V/1A
The MC220L converts 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. It is designed for
use with 850nm multi-mode/1310nm single-mode/WDM fiber cable utilizing the SC/LC-Type connector, trans-
mitting data up to 0.55 kilometers or 10 kilometers. What's more, MC220L can work as a stand alone device (no
chassis required) or with TP-LINK’s 19” system chassis.
Works at 1000Mbps in Full-Duplex mode for both TX port and FX port
Supports Auto MDI/MDIX for TX port
Provides switch configuration of Force /Auto transfer mode for FX port
FX port support hot-swappable
Extends fiber distance up to 0.55 km for multi-mode fiber and 10 km for single-mode fiber
Easy-to-view LED indicators provide status to monitor network activity easily
MC220L