Quick Start >> Cloud Camera See more · Be sure
1 Connect the camera to the network your smartphone is on. Internet 9V 0.6A ETHERNET LAN Outlet Camera WAN Wireless Router Smartphone System LED Flashing red: System starting Solid red: Network not connected Solid green: Network connected Smartphone requirements: Android 3.0 or higher iOS 7.
2 Download and install the tpCamera app.
3 Launch tpCamera, log into your TP-LINK Cloud account or create one, then follow the app instructions to set up your new camera.
Relocate the camera to your desired location. You can simply place it on a flat surface, mount it with the provided adhesive or with screws (not included). 1 Unscrew the camera head. 3 Use two screws to secure the base. 2 Remove the base cover. 4 Put the base cover and camera head back on.
More about TP-LINK Cloud Camera. 7106505940 REV1.0.
How to view the camera Via Smartphone: On the My Cam screen, tap your camera to view the live video.
Via Computer: Log into the TP-LINK Cloud website (https://www.tplinkcloud.com), and click your camera to view the live video.
How to use the WPS/RESET Button WPS (Wi-Fi Protected Setup): If your Wi-Fi router supports WPS, you can connect the camera to your Wi-Fi network using WPS. For details, see the camera’s User Guide. Reset: ! Note Resetting a registered camera will remove it from your TP-LINK Cloud account. 9V 0.6A WPS/RESET ETHERNET WPS/RESET Press & Hold for 5 seconds While the camera is powered on, press the WPS/RESET button for 5 seconds until the System LED on the front panel goes off.
Get more with the camera Get notifications when motion is detected Log into the web management page of your camera to set Motion Detection and Notification Delivery. For details and more advanced configurations, see the camera’s User Guide. View all of your cameras on one screen Download and install the TP-LINK Camera Control utility to view and manage multiple cameras on one screen. For details, see the Camera Control User Guide.
