user manual
Hardware Connection
1
Quick Installation Guide
PCI/PCI Express Network Adapter
MODEL NO. TG-3269/ TG-3468/ TF-3200/ TF-3239DL
7106504411 REV2.2.0
Software Installation
2
(Please select the instructions according to your operating system. Here we use TF-3239DL as an example to illustrate the installation procedures.)
Package Contents
System Support
· Windows 8 · Windows 7 · Windows Vista · Windows XP
· Linux · Windows 2000 · Windows 2003 ( TF-3200 only)
QIG
Resource CD
PCI/ PCI Express Network Adapter
MODEL NO. TG-3269/ TG-3468/ TF-3200/ TF-3239DL
Steps：
1. Turn o your computer and unplug the power cord from the computer.
2. Open the case. Locate an available PCI/ PCI Express slot and remove its
slot cover. Keep the screw.
3. Insert your PCI/ PCI Express adapter into the corresponding slot.
(The gure above takes PCI adapter for example.)
4. Secure the adapter with the screw removed in Step 2.
5. Close the case and insert the power cord back into the computer.
6. Turn on your computer.
You may see the Found New Hardware Wizard when
the adapter is plugged. Please click Cancel.
For Windows XP
For Windows XP
5
Select Don’t Search. I will choose the
driver to install, and click Next.
7
Click Browse ... .
9
Click OK.
11
Click Continue Anyway.
2
Right-click My Computer, and then click
Manage.
6
Click Have Disk ... .
8
Find the right product model and operation
system in the resource CD directory, choose
the .inf le, and then click Open.
10
Click Next.
1
Insert the TP-LINK Resource CD
into the CD-ROM drive.
4
Select Install from a list or specic
location[Advanced], and click Next.
12
Click Finish to complete the installation.
3
Open Device Manager. Find your network adapter
and right-click it; then click Update Driver ... .
For TF-3200, you
need to refer to
Appendix:
Troubleshooting
-T2 for the
installation of
this step.
PCI/ PCI Express Network Adapter