User Manual

Installation Guide
Omada Hardware Controller
Setup with videos
Scan QR code or visit
https://www.tp-link.com/support/setup-video/
Typical Network Topology
A DHCP server (typically a router) with DHCP function enabled is
required to assign IP addresses to the EAPs and OC200/OC300
in your local network.
Router
PoE Switch
Omada Hardware Controller
(OC200 for illustration)
Wall Plate AP
Celling Mount APManagement Device
Outdoor AP
5
Software Congurations
Omada Hardware Controller supports two management options:
Remote Management: configure and manage via cloud access
Local Management: configure and manage locally
6
TP-Link hereby declares that the device is in compliance with the essential requirements and
other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU
and (EU)2015/863.
The original EU declaration of conformity may be found at https//www.tp-link.com/en/ce.
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service,
please contact us.
For detailed configurations, please visit https://www.tp-link.com/support to
download the User Guide in the download center.
For technical support, the user guide and other information,
please visit https://www.tp-link.com/support, or simply
scan the QR code.
If you have any suggestions or needs on the product
guides, welcome to email [e-mail].
To ask questions, find answers, and communicate with TP-Link users
or engineers, please visit https://community.tp-link.com to join
TP-Link Community.
1. Download the Omada app on your mobile device. It can be
downloaded from App Store or Google Play:
2. Make sure that your mobile device and OC200/OC300 are in
the same subnet.
3. Launch the app and go to Local Access. Then tap the + button
on the upper-right corner to add OC200/OC300.
4. Choose the auto-detected device or manually add your device
by entering its IP address/URL and port number. Follow the
step-by-step instructions to complete the Quick Setup.
Local Management
Via Omada App
Scan for Omada App
or
Download Omada App
1. Make sure that your management device and OC200/OC300
are in the same subnet.
2. Check the DHCP server (typically a router) for OC200/OC300’s
IP Address. The default fallback IP address is 192.168.0.253.
Via a Web Browser
3. Launch a web browser and type OC200/OC300’s IP address in
the address bar, then press Enter (Windows) or Return (Mac).
4. Click Let’s Get Started and follow the step-by-step instructions
to complete the conguration wizard.
https://<IP_address>
If you have downloaded the Omada app, you can also
check the app for OC200/OC300’s IP address.
The fallback IP address is used when OC200/OC300 fails
to get dynamic IP address from the DHCP server.
Remote Management
1. Make sure that your mobile device and OC200/OC300 can
access the internet.
2. Download the Omada app on your mobile device. It can be
downloaded from App Store or Google Play:
3. Launch the app and go to Cloud Access. Then log in with your
TP-Link ID.
4. Tap the + button on the upper-right to add OC200/OC300 and
follow the step-by-step instructions to complete the Quick
Setup.
Via Omada App
Scan for Omada App Download Omada App
or
1. Make sure that your management device and OC200/OC300
can access the internet.
2. Launch a web browser and type https://omada.tplinkcloud.com
in the address bar, then press Enter (Windows) or Return (Mac).
3. Enter your TP-Link ID and password to log in.
4. Click Controller on the left column, and then click + Add
Controller and choose Hardware Controller to add your
OC200/OC300.
5. Click Let’s Get Started and follow the step-by-step
instructions to complete the conguration wizard.
https://omada.tplinkcloud.com
Via a Web Browser