Operation Manual

ManualsBrandsTP Link ManualsBattery ChargerPB50 powerbank

How do I recharge the Power Bank?

Connect the Power Bank via a power adapter to an

electrical power outlet.

Note:

How do I use the Power Bank to charge other

portable devices?

Connect your device(s) via the charging cable to the

Power Bank.

User Guide

Note:

10000mAh Power Bank

Model No. PB50

Contact our technical support if you have any

questions related to this product:

www.tp-link.com/en/support/contact

For more information, please visit:

www.tp-link.com

Keep this device away from water, fire, humidity or hot

environments.

Do not heavily drop or impact this device.

Do not attempt to extrude or pierce this device, which

may cause it to short-circuit.

Do not attempt to disassemble, modify or repair this

device by yourself.

Do not use a damaged power adapter or USB cable to

charge this device.

If the product appears to be bulging or shows other

undesirable phenomena, stop using the product

immediately and contact us or your dealer.

Please recycle this device at an appointed disposal

location.

This product is not suitable for those lacking relevant

knowledge and experience, please use under the

supervision and guidance of professionals.

Please charge this device once every three months to

avoid shortening its battery life.

Please use the recommended power adapter to charge

this device. Power adapter is not provided by TP-LINK.

Attention

Status Button

Output1: 5V/2A

Output2: 5V/1A

4 LED Lights

Input: 5V/2A

1. The Power Bank is compatible with 5V DC adapters. For more efficiency,

we suggest using a 5V/2A power adapter to charge the Power Bank.

2. You can also charge the Power Bank via a computer's USB port, but it will

take longer to charge.

3. The Power Bank cannot charge other devices while it is charging.

2A:7h

1A:10h

LED Display Battery Level

75%~100%

50%~75%

25%~50%

5%~25%

0%~5%

Press the Battery

Status Button to

check the current

battery level, the

LEDs will turn off

automatically after 5

seconds.

1 LED on

Off

1 LED blinking

7106505452 REV1.0.1

1. The 5V/2A USB port can automatically adjust its voltage to charge your

5V/1A devices.

2. One blinking LED indicates the battery level is less than 5%.

LED Display Battery Level

0%~25%

25%~50%

50%~75%

75%~100%

100%

1 LED on

1 LED blinking

5V/1A

5V/2A