User Guide

Table Of Contents

Chapter 6 More Features of Your Extender

Wireless devices that support WPS, including Android phones, tablets, and most USB

network cards, can be connected to your extender through this method (not supported

by iOS devices).

1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set

for the extender.

2. Go to Wireless > WPS.

3. Enable WPS.

4. Connect via WPS:

• Client’s PIN: Enable Client’s PIN and enter your device’s PIN in the blank, and

then click CONNECT.

• AP’s PIN: Enable AP’s PIN and enter the PIN on your device. You can click

GENERATE to get a new PIN or click DEFAULT to restore the PIN to its factory

one.