Installation Manual

ManualsBrandsTP-Link ManualsComputers & AccessoriesAC1200 WiFi Extender (RE300), Covers Up to 1500 Sq.ft and 25 Devices, Up to 1200Mbps, Supports OneMesh, Dual Band WiFi Repeater, WiFi Booster to Extend Range of WiFi Internet

7106509162 REV2.0.0

Plug the extender into a power outlet next to your router. Wait until

its Power LED turns solid on.

Power On

Relocate

1. Plug in the extender about halfway between your router and the Wi-Fi dead

zone. The location you choose must be within the range of your router.

2. Wait for about 2 minutes until the LED turns solid white. If it doesn't,

relocate the extender closer to the router to achieve better signal quality.

Quick Installation Guide

Range Extender

Router Devices

Halfway

White: Suitable location

Red: Too far from router

Enjoy the internet!

Tip: For more intuitive location assistance, access extender settings via the Tether app and go to

Tools > Location Assistant.

Next to

Solid On

Set Up

1. Press the WPS button on your router.

2. Within 2 minutes, press the WPS button on the

extender for 1 second. The LED should

change from blinking to solid on, indicating

successful connection.

3. If the extender connects to a dual-band router,

repeat steps 1 and 2 to connect to the other

band.

For more details, please refer to the user guide at

https://www.tp-link.com/support/download.

1. Connect your computer or smartphone to the

extender’s network TP-Link_Extender.

2. Visit http://tplinkrepeater.net or

http://192.168.0.254 in a web browser.

Create a password to log in.

3. Follow web instructions to complete the setup.

Extended Network Names:

Router’s network name with

_EXT

at the end

Same as your OneMesh router

(See back for OneMesh details)

Passwords:

Same as your router

Via a Web Browser

Via the WPS Button

More Setup Methods

1. Get the up-to-date Tether app from the

Apple App Store or Google Play, or simply

scan the QR code.

Tether

Scan for Tether

Via the Tether App

2. Launch the Tether app and log in with your

TP-Link ID. If you don’t have an account,

create one first.

Welcome to Tether

TP-Link ID (Email)

Password

Note: If you cannot find your device, please refer to

FAQ > Q1.

Note: If the LED does not turn solid on, please refer to

FAQ > Q2.

4. Follow app instructions to complete the setup.

The LED should turn solid on, indicating

successful connection to your router.

3. Tap the button and select Range Extender.

Solid On

My Devices

No devices found.

Choose your device type

Router

Gaming Router

Range Extender

Setup with videos

Scan the QR code, or visit

https://www.tp-link.com/support/setup-video/#range-extenders

and search for the setup video of your model.

Summary of content (2 pages)

PAGE 1
Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on. Quick Installation Guide Range Extender Next to Setup with videos Solid On Scan the QR code, or visit https://www.tp-link.com/support/setup-video/#range-extenders and search for the setup video of your model. 2 Set Up More Setup Methods Via the Tether App 1. Get the up-to-date Tether app from the Apple App Store or Google Play, or simply scan the QR code. 3. Tap the button and select Range Extender.
PAGE 2
Access Extender Settings After setup, you can access extender settings via any of the methods below. You can reselect host network, change extended network settings and more. Note: If your extender and router use the same network name, Method 1 is recommended. OneMeshTM with Seamless Roaming TP-Link OneMesh router and extenders work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMesh’s seamless coverage.