Instructions / Assembly

4
Chapter 1
Get to Know About Your Extender
1. 2. 1. LED Explanation
You can check the extender’s working status by following the LED Explanation table.
Name Status Indication
Power
On The extender is on.
Flashing The extender is initializing.
Off The extender is off.
Signal
Blue
The extender is connected to the router, and is in a good
location.
Red
The extender is connected to the router, but is too far away
from it.
Flashing blue The extender is connecting to the router.
Off No active connection.
2.4GHz
On
The extender is connected to the 2.4GHz wireless network of
your host router.
Off No 2.4GHz wireless connection.
5GHz
On
The extender is connected to the 5GHz wireless network of
your host router.
Off No 5GHz wireless connection.
1. 2. 2. Port and Button Description
Ports or Buttons Description
WPS Button
Press the WPS button on your host router, and immediately press the WPS
button on the extender. The Signal LED of the extender should change to solid
blue, indicating successful WPS connection.
Reset (Hole) Use a pin to press the Reset button to reset the extender.
Ethernet Port
Connect your Ethernet-only device to the Ethernet port of the extender to join
the Wi-Fi network.