User's Guide

Chapter 2

Set Up Internet Connection

2. Wait until the Signal LED changes to solid on, which indicates that the WPS

connection is successful.

Note:

If the LED does not turn solid on, try again or refer to Method 1: Via the TP-Link Tether App or Method 2: Via a Web

Browser.

3. (Optional) If the extender connects to a dual band router, repeat steps 1 and 2 above

to connect to the other band.

4. Relocate your extender for optimal Wi-Fi coverage and performance.

1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone.

The location you choose must be within the range of your router.

2 ) Wait for about 2 minutes until the Signal LED

turns solid white. If it doesn’t,

relocate the extender closer to the router to achieve better signal quality.

Router Devices

Halfway

Suitable location

Too far from router

No connection

Note:

To minimize signal interference, please choose a location which is far away from Bluetooth devices and other

household electronic devices, such as cordless phones, microwave ovens and baby monitors.

5. Enjoy! Connect to the extended network and enjoy the Internet.

Extended Network Names:

Router’s network name with

_EXT

at the end

Same as your OneMesh router

Passwords:

Same as your router

Solid On