Operation Manual
Table Of Contents
- Introduction
- Connect the Extender to the Internet
- View the Information of the Extender
- Manage the Extended Network and Security Settings
- More Functions
- Manage the Extender
- Appendix
Connect the Extender to the Internet
● No Interference - Choose a location away from Bluetooth devices and
other household electronics, such as cordless phone, microwave, and
baby monitor, etc., to minimize signal interference.
Place your extender in a well-ventilated place far from direct sunlight,
any heater or heating vent.
Leave at least 2 inches (5cm) space around the device for heat
dissipation.
Turn off your extender and unplug the power adapter in a lighting storm
to avoid damage.
Use Web browser, such as Microsoft Internet Explorer 5.0 or above,
Netscape Navigator 6.0 or above.
Operating temperature of the extender should be 0℃~40℃ (32℉
~104℉).
Operating humidity of the extender should be 10%~90%RH (Non-
condensing).
Power On
Plug the extender into an electrical outlet near your router, and wait until
the Power LED is lit and solid blue.
Connect
Press the WPS button on your router/AP.
Your router should support WPS. Otherwise, please use Using
your web browser.