User manual

LED Explanation
RE360
Applicable Model:
Quick Installation Guide
Enjoy!
Both extended networks share the same Wi-Fi passwords as those of your host networks, but may have dierent wireless network names
(SSIDs) if you have customized them during the conguration.
On: The extender is connected to the
2.4GHz/5GHz wireless network of your host
router.
O: No wireless connection has been
established.
2.4GHz/5GHz
Congure
Relocate
Wait until the Signal LED turns solid blue. If not, relocate it closer
to the router to achieve better signal quality.
Plug in the extender about halfway between your router and the
Wi-Fi dead zone. The location you choose must be within the range
of the host network.
1
2
or
Connect to the extender
For Windows Users
1. Unplug the Ethernet cable from your Mac
(if any).
2. Click the Wi-Fi icon in the top right corner of the
screen and connect to the extender’s network
TP-LINK_Extender_2.4GHz/5GHz.
For Mac OS X Users
Wi-Fi: On
Turn Wi-Fi O
TP-LINK_Extender_5GHz
Join Other Network...
Create Network...
Open Network Preferences...
TP-LINK_Extender_2.4GHz
Plug your extender into a power
outlet next to your router.
Power on
1
3
4
2
Option ONE
Quick Setup Using Your Web Browser
Launch a web browser and enter
http://tplinkrepeater.net or http://192.168.0.254 in
the address bar. Create a password for future login
attempts, and click Start.
3
Either keep the default SSIDs or customize them
for the extended networks, and then click Next.
4
If the login window does not appear, please refer
to FAQ > Q1.
If your router does not support 5GHz wireless
network, please click Skip to continue.
2
Select your router’s 2.4GHz/5GHz host network,
and enter its password. Then click Next.
1
1. Unplug the Ethernet cable from your computer
(if any).
2. Click the Wi-Fi icon on the taskbar and connect
to the extender’s network
TP-LINK_Extender_2.4GHz/5GHz.
Skip
Next
Please select 2.4GHz host network or skip this network.
SSID Signal MAC Address Security
Your router’s wireless name
30-B5-C1-33-99-76
Host 2.4GHz Password:
TP-LINK_123456
23-B5-C0-30-90-06
Back Other... Rescan
12345678
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
Extended 2.4GHz SSID:
Your network name
Copy Host SSID
Hide SSID broadcast
Note: The extended 2.4GHz password is the same as your Host password.
Extended 5GHz SSID:
Your network name_5G
Copy Host SSID
Hide SSID broadcast
Note: The extended 5GHz password is the same as your Host password.
Back Next
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
Verify your wireless settings and click Save. The
corresponding LED(s) (2.4GHz/5GHz) should turn
solid on.
On: A powered-on device is connected to the
Ethernet port.
O: No powered-on device is connected to
the Ethernet port.
Ethernet
On: The extender is on.
Flashing:The extender is starting up.
O: The extender is o.
Power
Solid blue: The extender is connected to your
router’s wireless network and is in a suitable
location.
Solid red: The extender is experiencing poor
signal strength. Try relocating it closer to your
router.
Flashing blue: WPS connection is being
established.
O: No wireless connection is established.
Signal
7106506519 REV1.0.0
Wait until the Power LED is solid on.
Note: RE360 (UK version) is used for demonstration in this
QIG. Image may dier from actual products.
Connection are available
Wireless Network Connection
TP-LINK_Extender_2.4GHz
TP-LINK_Extender_5GHz
Connect automatically
Connect
√
http://tplinkrepeater.net
Start
Conrm Password
Create Password
Extended NetworkHost Network
Blue: Suitable location
Red: Too far away