Chapter 6 Use Your Extender as an Access Point 2 ) Confirm the information and click Finish. 5. Connect the extender to your modem or wired router via an Ethernet cable. Now you can enjoy the Wi-Fi.
Chapter 6 6. 2. Use Your Extender as an Access Point Connect Wireless Devices to the Extender Method 1: Connect to the extender manually You can connect your wireless devices to the extender by using the extender’s wireless network names and passwords. Method 2: Connect to the extender via WPS Wi-Fi Protected Setup (WPS) provides an easier way to set up a secure Wi-Fi connection.
Chapter 6 6. 3. Use Your Extender as an Access Point LED Explanation for the Access Point Mode When the extender works in the Access Point mode, you can check its working status by following the LED Explanation table below. Name Status (Power) Blinking (Signal) 2.4G 5G On/Off Indication (For Access Point Mode) The extender is on or off. The system is starting up or firmware is being upgraded. On A WPS connection is established.
Chapter 7 Manage Your Extender This chapter presents how to manage and maintain your extender.
Chapter 7 7. 1. Manage Your Extender Set System Time The System Time of the extender will be used for time-based function such as the Power Schedule function. If you have enabled the Daylight Saving Time feature, the system time will be sychronized with the daylight saving time you configure. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > System Tools > Time Settings. • To get system time: 1.
Chapter 7 Manage Your Extender 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > System Tools > LED Control. • To turn off the LEDs: • To specify a time period when LEDs are off: Disable LED Status. 1. Select Night Mode. 2. Specify the LED off time period. Note: The effective time schedule for Night Mode is based on the system time of the extender. Refer to Set System Time to get the correct system time. 3.
Chapter 7 Manage Your Extender Note: The effective time schedule for Power Schedule is based on the system time of the extender. Refer to Set System Time to get the correct system time. 3. Click Save. 7. 4. Upgrade the Firmware TP-Link is committed to improving product features, giving you a better network experience. We will inform you through the web management page if there’s any update firmware available for your extender.
Chapter 7 Manage Your Extender 3. Focus on the Online Upgrade section, and click Upgrade. 4. Wait a few minutes for the upgrade and reboot to complete. • To upgrade the firmware locally: 1. Download the latest firmware file for the extender from our website www.tp-link.com. 2. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 3. Go to Settings > System Tools > Firmware Upgrade. 4.
Chapter 7 Manage Your Extender • To backup configuration settings: • To restore configuration settings: Click Backup to save a copy of the current settings to your local computer. A ‘.bin’ file of the current settings will be stored on your computer. 1. Click Browse to locate the backup configuration file stored on your computer, and click Restore. 2. Wait a few minutes for the restore and reboot. Note: During the restore process, do not power off or reset the extender.
Chapter 7 Manage Your Extender 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > System Tools > Admin Account. 3. Enter the old password. Then enter the new password twice (case-sensitive) and click Save. 4. Use the new password for future logins. 7. 7. Check System Log If the extender is not working properly, you can save the system log and send it to our technical support team. 1. Visit http://tplinkrepeater.
Chapter 7 Manage Your Extender 44
FAQ Q1. How to reset the extender to its factory default settings? • With the extender powered on, use a pin to press the Reset button for 1 second. The extender will reboot. • Log in to the extender’s web management page. Go to Settings > System Tools > Backup & Restore and click Factory Restore. Q2. What should I do if I forget my login password? Refer to FAQ > Q1 to reset the extender, and then visit http://tplinkrepeater.net to create a new login password.
1. Log in to your router and disable the MAC filter, wireless access control or ACL. Note: For more information about how to disable your router’s MAC filter, wireless access control or ACL, please refer to your router’s user guide. 2. Power on your extender, and run the Quick Setup to configure your extender. 3. Connect all of your devices to the extended network. 4. On your router, add all the Online Devices’ MAC addresses to your router’s MAC filter table. 5.
FCC compliance information statement Product Name: AX1500/AX1800 Wi-Fi 6 Range Extender Model Number: RE500X/RE600X Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2400 MHz -2483.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Caution: 1.
低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立 即停用,並改善至無干擾時方得繼續使用。 前述合法通信,指依電信管理法規定作業之無線電通信。 低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 5.7.9.
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Do not use the device where wireless devices are not allowed.
Symbol Explanation Protective earth Caution, risk of electric shock Fuse is used in neutral N 53