Operation Manual

10
Chapter 2 Quick Setup for Internet Connection
5. Verify your wireless settings and tap Finish. Corresponding Wi-Fi signal icon(s)(
2.4GHz /
5GHz) at the top left of the touchscreen should be lit.
2. 2. 2. Method TWO: Using WPS (Wi-Fi Protected Setup)
1. Press the WPS button on your host router.
2. Tap WPS on the menu screen of the extender, and tap Start WPS. Once the WPS
connection is successful, a success message will display.
2. 2. 3. Method THREE: Using Web-based Utility
The web-based utility can be used on any Windows, Macintosh or UNIX OS with a web
browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
1. Connect your computer to your extender wirelessly or via an Ethernet cable. The
default SSID (Wireless Network Name) and Wireless Password are printed on the
label at the bottom of your extender.
2. Launch a web-browser on your computer, type http://tplinkrepeater.net in the
address bar, and use admin (all lowercase) for both username and password to log in.