Operation Manual
Table Of Contents
19
Chapter 3
Further Conīguration
Note: If you want to add a device manually or delete a blocked device, tap Edit on the
Devices In Blacklist page.
Now devices in the blacklist cannot connect to your extender.
3. 4. WPS
Please refer to Method TWO: Using WPS (Wi-Fi Protected Setup) under Chapter 2 Quick
Setup for Internet Connection to connect the extender to your existing wireless network.
3. 5. LAN
By default, your extender is set to obtain an IP address automatically from the host
router. The LAN app allows you to use a specific IP address appropriate to your network
demand.
Note: We do NOT recommend you change the IP address unless you are quite sure about the IP setting for special
network demand. Random changes may lead to Internet disconnection.
1. Tap LAN on the menu screen, then tap Type to select Use the following IP address
and tap Done.
Done!