Users Manual

Chapter 7 More Features of Your Extender

7. 2. 2. Connect Your Wireless Devices to the Extender

Method 1: Connect to the extender manually

You can connect your wireless devices to the extender by manually entering the wireless

password on your device.

Method 2: Connect to the extender via WPS

Wi-Fi Protected Setup (WPS) provides an easier way to set up a secure Wi-Fi connection.

Wireless devices that support WPS, including Android phones, tablets and most USB

network cards, can be connected to your extender through this method (not supported

by iOS devices).

1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set

for the extender.

2. Go to Settings > Wireless > WPS.

3. Enable WPS.

4. Connect via WPS:

• AP’s PIN: Enable AP’s PIN and enter the PIN on your device. You can click Generate

to get a new PIN or click Default to restore the PIN to its factory one.

• Push Button (Recommended): Click Connect and push the WPS button on the

client device.

• PIN code: Enter the client’s PIN, and click Connect.