User Manual

Plug the extender into an electrical
outlet near your router, and wait until
the POWER LED is lit and solid blue.
or
Connect to the extender
Power on
Congure
2
If your router does not support 5GHz wireless
network, please click Skip to continue.
Select your router's 2.4GHz/5GHz host
network and enter its password. Then click
Next.
Exit
Other... Rescan
Skip
Next
Please select 2.4GHz Host network or skip this network.
SSIDID
1
2
Signal
MAC Address
Security
Your router’s wireless name
30:B5:C1:33:99:76
Host 2.4GHz Password:
TP_LINK_123456
23:B5:C0:30:90:06
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
12345678
3
4
Verify your wireless settings and click Save.
The corresponding LED(s) ( / )
should turn on and stay solid.
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
Extended 2.4GHz SSID:
Your network name
Copy Host SSID
Hide SSID broadcast
The extended 2.4GHz password is the same as your Host password.
Extended 5GHz SSID:
Your network name_5G
Copy Host SSID
Hide SSID broadcast
The extended 5GHz password is the same as your Host password.
Back Next
Either keep the default SSIDs or customize
them for the extended networks, and then
click Next.
Relocate
Both extended networks share the same Wi-Fi passwords as those of your host networks, but may have dierent wireless network
names (SSIDs) if you have customized them during the conguration.
Plug the extender into an electrical outlet about halfway
between your router and the Wi-Fi dead zone. The
location you choose must be within the range of your
host network.
Wait until the LED is lit and solid blue. If not, relocate it
closer to the router to achieve better signal quality.
1
2
1. Unplug the Ethernet cable from your Mac (if
any).
2. Click the Wi-Fi icon in the top right corner of
the screen, and connect to the extender’s
network (e.g.
TP-LINK_Extender_2.4GHz/5GHz).
For Mac OS X Users
Wi-Fi: On
Turn Wi-Fi O
TP-LINK_Extender_5GHz
Join Other Network...
Create Network...
Open Network Preferences...
TP-LINK_Extender_2.4GHz
For Windows Users
1. Unplug the Ethernet cable from your
computer (if any).
2. Click the Wi-Fi icon on your taskbar and
connect to the extender’s network (e.g.
TP-LINK_Extender_2.4GHz/5GHz).
Enjoy!
Option ONE
Quick Setup Using a Web Browser
7106507634 REV1.0.1
Red
Too far away
Blue
Ideal location
Host Network
Host Network
Extended Network
Launch a web browser and enter
http://tplinkrepeater.net or http://192.168.0.254
in the address bar. Create a password for future
login attempts, and click Start.
1
http://tplinkrepeater.net
Start
Confirm Password
Create Password
Connection are available
Wireless Network Connection
TP-LINK_Extender_2.4GHz
TP-LINK_Extender_5GHz
Connect automatically
Connect
√
If the login window does not appear, please refer to the
FAQ > Q1.
Button Explanation
Power button: To turn on or o the extender, press the Power button.
LED button: To turn on or o all the LEDs, press the LED button.
2.4GHz/5GHz
On: The extender is connected to the
2.4GHz/5GHz wireless network of your
host router.
O: No connection.
POWER
On: The extender is on.
Blinking: The extender is initializing.
O: The extender is o.
Solid blue: The extender is connected to the
router, and is in a good location.
Solid red: The extender is connected to the
router, but is too far away from the router.
Blinking: WPS connection is in process.
O: No active connection.
(RE)
LED Explanation
Quick Installation Guide
Applicable Model:
RE650