Installation Manual

AC1350 Wireless Dual Band Router

If your internet connection is through an Ethernet cable directly from

the wall instead of through a modem, connect the Ethernet cable to

the router’s Internet port, then follow Step 4 and 5 to complete the

hardware connection.

Verify that the following LEDs

are on and solid to confirm the

hardware is connected correctly.

2.4G

Internet

Power

Note: If the 2.4G LED and 5G LED are

o, press and hold the Wi-Fi button on the

rear panel for about 2 seconds and both

the LEDs should turn solid on in a few

seconds.

Quick Installation Guide

C59

Connect the Hardware

Power adapter

Router

Connect the power

adapter to the router

and turn on the router.

WPS

Connect the modem to the

router’s Internet port with an

Ethernet cable.

Turn o the modem, and

remove the backup

battery if it has one.

Turn on the modem, and

then wait about 2 minutes

for it to restart.

Modem

Power adapter

Internet

PAGE 1
Quick Installation Guide AC1350 Wireless Dual Band Router C59 Power adapter Connect the Hardware If your internet connection is through an Ethernet cable directly from the wall instead of through a modem, connect the Ethernet cable to the router’s Internet port, then follow Step 4 and 5 to complete the hardware connection. 4 Router Internet Power adapter 1 Turn off the modem, and remove the backup battery if it has one. 2 Connect the modem to the router’s Internet port with an Ethernet cable.
PAGE 2
Configure the Cloud Router b Click the network icon of your computer or go to Wi-Fi settings of your smart device, and then select the SSID to join the network. Computer Method ONE: Via TP-Link Tether App 1. Download the Tether app. Smart Device Connections are available or TP-Link_XXXX Scan for Tether Tether 2. Connect your smartphone to the router. SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G The default wireless network names (SSIDs) and password are printed on the label at the bottom of the router.