CLI Reference Guide

122
Chapter 19 PoE Commands
PoE (Power over Ethernet) technology describes a system to transmit electrical power along with
data to remote devices over standard twisted-pair cable in an Ethernet network. It is especially
useful for supplying power to IP telephones, wireless LAN access points, cameras and so on.
power inline consumption (global)
Description
The power inline consumption command is used to configure the max power
the PoE switch can supply globally.
Syntax
power inline consumption power-limit
Parameter
power-limit ——The max power the PoE switch can supply. For T1500-28PCT it
ranges from 1 to 180w and the value is 180w.
Command Mode
Global Configuration Mode
Example
Configure the max power the PoE switch can supply as 160w:
T1500-28PCT(config)# power inline consumption 160
power profile
Description
The power profile command is used to create a PoE profile for the switch. To
delete the configured PoE profile configuration, please use no power profile
command. PoE Profile is a short cut for the configuration of the PoE port. In a
PoE profile, the PoE status, PoE priority and power limit are configured. You
can specify a PoE profile for each PoE port individually.
Syntax
power profile name [ supply { enable | disable } [ prior ity { low | middle | high }
[ consumption { power-limit | auto | class1 | class2 | class3 | class4 } ] ] ]
no power profile name