CLI Reference Guide

137
T1500-28PCT(config)# spanning-tree mst configuration
T1500-28PCT(config-mst)# instance 1 vlan 1-100
Disable Instance 1, namely remove all the mapping VLANs 1-100:
T1500-28PCT(config)# spanning-tree mst configuration
T1500-28PCT(config-mst)# no instance 1
Remove VLANs 1-50 in mapping VLANs 1-100 for Instance 1:
T1500-28PCT(config)# spanning-tree mst configuration
T1500-28PCT(config-mst)# no instance 1 vlan 1-50
name
Description
The name command is used to configure the region name of MST instance.
Syntax
name name
Parameters
name —— The region name, used to identify MST region. It ranges from 1 to 32
characters.
Command Mode
MST Configuration Mode
Example
Configure the region name of MST as “region1”:
T1500-28PCT(config)# spanning-tree mst configuration
T1500-28PCT(config-mst)# name region1
revision
Description
The revision command is used to configure the revision level of MST instance.
Syntax
revision revision