CLI Reference Guide

83
Parameter
port-list —— The list of Gigabit Ethernet ports.
Command Mode
Global Configuration Mode
User Guidelines
Command in the Interface Range gigabitEthernet Mode is executed
independently on all ports in the range. It does not effect the execution on the
other ports at all if the command results in an error on one port.
Example
To enter the Interface Range gigabitEthernet Configuration Mode, and configure
Gigabit Ethernet ports 27 and 28 at the same time by adding them to one
port-list:
T1500-28PCT(config)# interface range gigabitEthernet 1/0/27-28
description
Description
The description command is used to add a description to the Ethernet port. To
clear the description of the corresponding port, please use no description
command.
Syntax
description string
no description
Parameter
string —— Content of a port description, ranging from 1 to 16 characters.
Command Mode
Interface Configuration Mode ((interface fastEthernet / interface gigabitEthernet)
Example
Add a description Port5 to port 1/0/5:
T1500-28PCT(config)# interface fastEthernet 1/0/5
T1500-28PCT(config-if)# description Port5