User Guide

124
Choose the menu ACL→ACL Config→Combined ACL to load the following page.
Figure 11-6 Create Combined ACL
The following entries are displayed on this screen:

Create Combined Rule
ACL ID: Select the desired Combined ACL for configuration.
Rule ID: Enter the rule ID.
Operation:
Select the operation for the switch to process packets which match the
rules.
 Permit: Forward packets.
 Deny: Discard Packets.
S-M AC: Enter the source MAC address contained in the rule.
D-M AC: Enter the destination MAC address contained in the rule.
S-IP: Enter the source IP address contained in the rule.
D-IP: Enter the destination IP address contained in the rule.
Mask: Enter the MAC/IP
address mask. If it is set to 1, it must strictly match
the address.
11.2 Policy Config
A Policy is used to control the data packets those match the corresponding ACL rules by
configuring ACLs and actions together for effect. The operations here include stream mirror,
stream condition, QoS remarking and redirect.
The Policy Config can be implemented on Policy Summary, Police Create and Action Cre ate
pages.
11.2.1 Policy Summary
On this page, you can view the ACL and the corresponding operations in the policy.