User Guide

128
Choose the menu ACL→Policy Binding→VLAN Binding to load the following page.
Figure 11-12 Bind the policy to the VLAN
The following entries are displayed on this screen:

VLAN-Bind Config
Policy Name: Select the name of the policy you want to bind.
VLAN ID: Enter the ID of the VLAN you want to bind.

VLAN-Bind Table
Index: Displays the index of the binding policy.
Policy Name: Displays the name of the binding policy.
VLAN ID: Displays the ID of the VLAN bound to the corresponding policy.
Direction: Displays the binding direction.
Configuration Procedure:
Step Operation Description
1 Configure ACL rules Required. On ACL→ ACL Config
configuration pages,
configure ACL rules to match packets.
2 Configure Policy Required. On ACL→Policy Config
configuration pages,
configure the policy to c
ontrol the data packets those match
the corresponding ACL rules.
3 Bind the policy to the
port/VLAN
Required. On ACL→Policy Binding
configuration pages,
bind the policy to the port/VLAN to make the policy effective
on the corresponding port/VLAN.
11.4 Application Example for ACL
 Network Requirements
1. The manager of the R&D department can access to the forum of the company. The MAC
address of the manager is 00-64-A5-5D-12-C3.
2. The staff of the R&D department can visit the forum.
3. The staff of the marketing department cannot visit the forum.
4. The R&D department and marketing department cannot communicate with each other.