User Guide

129
 Network Diagram
 Configuration Procedure
Step Operation Description
1
Configure for
requirement 1
On ACL→ACL Config→ACL Create page, create ACL 11.
On ACL→ AC L Config →M AC ACL page, select ACL 11,
create Rule 1,
configure the operation as Permit, configure the S-
MAC as
00-46-A5-5D-12-C3 and mask as FF-FF-FF-FF-FF-F F.
On AC L→Policy Config→Policy Create page, cr
eate a policy named
manager.
On ACL→Policy Config→Action Create
page, add ACL 11 to Policy
manager.
On ACL→Policy Binding→Port Binding
page, select Policy manager
to bind to port 3.
2
Configure for
requirement 2
and 4
On ACL→ACL Config→ACL Create page, create ACL 100.
On ACL→ACL Config→Standard-IP ACL
page, select ACL 100,
create Rule 1, configure operation as Deny, configure S-
IP as
10.10.70.0 and mask as 255.255.255.0, configure D-IP as 10.10.50.1
and mask as 255.255.255.0.
On ACL→ACL Config→Standard-IP ACL
page, select ACL 100,
create Rule 2, configure operation as Permit, configure S-
IP as
10.10.70.0 and mask as 255.255.255.0, configure D-IP as 10.10.88.5
and mask as 255.255.255.255.
On ACL→Policy Config→Policy Create
page, create a policy named
limit1.
On ACL→Policy Config→Action Create
page, add ACL 100 to Policy
limit1.
On ACL→Policy Binding→Port Binding
page, select Policy limit1 to
bind to port 3.