User Guide

139
Configuration Procedure:
 If SNMPv3 is employed, please take the following steps:
Step Operation Description
1 Enable SNM P function globally. Required. On the SNM P→SNM P Config
→Global
Config page, enable SNMP function globally.
2 Create SNMP View. Required. On the SNM P→SNMP Config→SNM P
View
page, create SNMP View of the management
agent. The default View Name is viewDefault and
the default OID is 1.
3 Create SNMP Group. Required. On the SNM P→SNMP Config→SNM P
Group
page, create SNMP Group for SNMPv3 and
specify SNMP Views with various access levels for
SNMP Group.
4 Create SNMP User. Required. On the SNM P→SNMP Config→SNM P
User page, create SNMP User in the Group and
configure the auth/privacy mode and auth/privacy
password for the User.
 If SNMPv1 or SNMPv2c is employed, please take the following steps:
Step Operation Description
1 Enable SNMP function globally. Required. On the SNM P→SNM P
Config→Global Config page, enable SNM P
function globally.
2 Create SNMP View. Required. On the SNM P→SNM P Config→SNM P
View
page, create SNMP View of the
management agent. The default View Name is
viewDefault and the default OID is 1.
3
Configure
access level
for the User.
Create SNMP
Community
directly.
Required alternatively.
 Create SNMP Community directly.
On the SNM P→SNMP Config→ SNM P
Community
page, create SNMP Community
based on SNMP v1 and SNMP v2c.
 Create SNMP Group and SNMP User.
Similar to the configuration way based on
SN
MPv3, you can create SNMP Group and
SNMP User of SNMP v1/v2c. The User
name can limit access to the SNMP agent
from SNMP network management station,
functioning as a community name. The
users can manage the device via the Read
View, Write View and Notify V
iew defined in
the SNMP Group.
Create SNMP
Group and SNMP
User.