User Guide

167
3. The test result is just for your reference.
4. If the port is 100Mbps and its connection status is normal, cable test can’t get the length of the
cable.
14.4 Network Diagnostics
This switch provides Ping test and Tracert test functions for network diagnostics.
14.4.1 Ping
Ping test function, testing the connectivity between the switch and one node of the network,
facilitates you to test the network connectivity and reachability of the host so as to locate the
network malfunctions.
Choose the menu Maintenance→Network Diagnostics→Ping to load the following page.
Figure 14-9 Ping
The following entries are displayed on this screen:

Ping Config
Destination IP
: Enter the IP address of the destination node for Ping test.
Ping Times
:
Enter the amount of times to send test data during Ping testing. The
default value is recommended.
Data Size
:
Enter the size of the sending data during Ping testing. The default
value is recommended.
Interval
: Specify the interval to send IC
MP request packets. The default value
is recommended.