User Guide

43
Choose the menu Switching→LAG→LACP Config to load the following page.
Figure 5-10 LACP Config
The following entries are displayed on this screen:

Global Config
Syste m Prior ity:
Specify the system priority for the switch. The system
priority and
MAC address constitute the system identification (ID). A lower system
priority value indicates a higher system priority. When exchanging
information between systems, the system with higher priority
determines which link aggregation a link bel
ongs to, and the system
with lower priority adds the proper links to the link aggregation
according to the selection of its partner.

LACP Config
Port Select:
Click the Select button to quick-
select the corresponding port based
on the port number you entered.
Select:
Select the desired port for LACP configuration. It is multi-optional.
Port:
Displays the port number.
Admin Key:
Specify an admin k
ey for the port. The member ports in a dynamic
aggregation group must have the same admin key.
Port Priority
:
Specify a Port Priority for the port. This value determines the priority
of the port to be selected as the dynamic aggregation group