Installation Manual

04
Smart PoE+ Switch
Introduction
■
Rear Panel
The rear panel of T1500G-10MPS is shown as the following figure.
Kensington Security Slot
Power Socket
Grounding Terminal
Figure 1-2 Rear Panel of
T1500G-10MPS
Kensington Security Slot
Secure the lock (not provided) into the security slot to prevent the device from
being stolen.
Power Socket
Connect the female connector of the power cord here, and the male connector
to the AC (Alternating Current) power outlet. Please make sure the voltage of the
power supply meets the requirement of the input voltage.
Grounding Terminal
The switch already comes with lightning protection mechanism. You can also
ground the switch through the PE (Protecting Earth) cable of AC cord or with
Ground Cable. For detailed information, please refer to Chapter 3 Lightning
Protection.
Caution: Please use the provided power cord.