User manual
Table Of Contents
- Package Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Login to the Switch
- Chapter 4 System
- Chapter 5 Switching
- Chapter 6 VLAN
- Chapter 7 Spanning Tree
- Chapter 8 Multicast
- Chapter 9 QoS
- Chapter 10 PoE
- Chapter 11 ACL
- Chapter 12 Network Security
- Chapter 13 SNMP
- Chapter 14 LLDP
- Chapter 15 Maintenance
- Appendix A: Specifications
- Appendix B: Glossary
Query Interval:
Enter the time interval of sending a general query frame by IGMP
Snooping Querier.
Max Response
Time:
Enter the maximal time for the host to respond to a general
query frame sent by IGMP Snooping Querier.
General Query
Source IP:
Enter the source IP of the general query frame sent by IGMP
Snooping Querier. It should not be a multicast IP or a broadcast
IP.
IGMP Snooping Querier Table
Select:
Select the desired entry. It is multi-optional.
VLAN ID: Displays t
he ID of the VLAN that enables IGMP Snooping
Querier.
Query Interval:
Displays the Query Interval of the IGMP Snooping Querier.
Max Response
Time:
Displays the maximal time for the host to respond to a general
query frame sent by IGMP Snooping Querier.
General Query
Source IP:
Displays the source IP of the general query frame sent by IGMP
Snooping Querier.
8.1.6 Profile Config
On this page you can configure an IGMP profile.
Choose the menu Multicast→IGMP Snooping→Profile Config to load the following page.
Figure 8-9 Profile Config
The following entries are displayed on this screen:
Profile Creation
104