User manual
Table Of Contents
- Package Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Login to the Switch
- Chapter 4 System
- Chapter 5 Switching
- Chapter 6 VLAN
- Chapter 7 Spanning Tree
- Chapter 8 Multicast
- Chapter 9 QoS
- Chapter 10 PoE
- Chapter 11 ACL
- Chapter 12 Network Security
- Chapter 13 SNMP
- Chapter 14 LLDP
- Chapter 15 Maintenance
- Appendix A: Specifications
- Appendix B: Glossary
other entries.
Note:
Among the entries with Critical collision level, the one with the highest Source priority will take
effect.
12.1.2 Manual Binding
You can manually bind the IP address, MAC address, VLAN ID and the Port number together in
the condition that you have got the related information of the Hosts in the LAN.
Choose the menu Network Security→IP-MAC Binding→Manual Binding to load the following
page.
Figure 12-2 Manual Binding
The following entries are displayed on this screen:
Manual Binding Option
Host Name:
Enter the Host Name.
IP Address:
Enter the IP Address of the Host.
MAC Address:
Enter the MAC Address of the Host.
VLAN ID:
Enter the VLAN ID.
Protect Type:
Select the Protect Type for the entry.
Port:
Select the number of port connected to the Host.
Manual Binding Table
Select:
Select the desired entry to be deleted. It is multi-optional.
Host Name:
Displays the Host Name here.
150