user manual

Hardware Connection
1
Quick Installation Guide
450Mbps Wireless N Dual Band PCI Express Adapter
MODEL NO. TL-WDN4800
7106504041
For Windows Vista
For Windows XP
You may see the Found New Hardware Wizard after the
adapter has been inserted. Please click ‘Cancel’.
Package Contents
System Requirement
· Windows 7 · Windows Vista · Windows XP
Resource CD
QIG
Steps：
1. Turn o your computer and unplug the power cord from the computer.
2. Open the case. Locate an available PCI Express slot and remove its slot cover.
Keep the screw.
3. Insert the adapter into the PCI Express slot as shown above.
4. Secure the adapter with the screw removed in Step 2.
5. Close the case and insert the power cord back into the computer.
6. Turn on your computer.
1
Insert the TP-LINK Resource CD into the CD-ROM
drive.
Find the model TL-WDN4800 and select Install
Driver&Utility.
2
Select Install TP-LINK Wireless Conguration
Utility and Driver and then click Next.
4
5
Click Change to specify the destination location
or you can leave it default. Click Next to continue.
6
Click Install to install the driver and utility for your
adapter.
TL-WDN4800
Software Installation
2
(The installtion procedures in Windows 7/ Vista/ XP are similar. Here takes the procedures in Windows 7 for example.)
The following screen will then appear.
Click Finish to complete the setup.
8
7
The installation process may take 1~2 minutes.
The InstallShield Wizard window will appear.
Click Next to continue.
3
TL-WDN4800
450Mbps Dual Band
PCI Express
450Mbps Wireless N Dual Band PCI Express Adapter
MODEL NO. TL-WDN4800
450Mbps Wireless N Dual Band PCI Express Adapter