User manual

4
Chapter 1
Get to Know About Your Router
LED Explanation
Name Status Indication
(Power)
On The system has started up successfully.
Flashing
The system is starting up or the firmware is being upgraded. Do
not disconnect or power off your router.
Off Power is off.
(2.4GHz Wireless)
On The 2.4GHz wireless band is enabled.
Off The 2.4GHz wireless band is disabled.
(5GHz Wireless)
On The 5GHz wireless band is enabled.
Off The 5GHz wireless band is disabled.
(60GHz
Wireless)
On The 60GHz wireless band is enabled.
Off The 60GHz wireless band is disabled.
(Ethernet)
On
At least one powered-on device is connected to the router’s LAN
port.
Off No powered-on device is connected to the router’s LAN port.
(Internet)
Blue On Internet service is available.
Orange On
The router’s Internet port is connected, but the internet service
is not available.
Off The router’s Internet port is unplugged.
(WPS)
On/Off
This light remains on for 5 minutes when a WPS connection is
established, then turns off.
Flashing WPS connection is in progress. This may take up to 2 minutes.
(USB)
On The inserted USB device is ready to use.
Flashing A USB device is being identified.
Off No device is plugged into the USB port.
The following buttons (view from left to right) are also located on the front.
Button Description
Name Description
(Wi-Fi Button)
Press and hold this Wi-Fi button for about 2 seconds to turn on or off the wireless
function of your router.
(WPS Button)
Press this WPS button, and immediately press the WPS button on your client
device. The WPS LED
of the router should change from flashing to solid on,
indicating successful WPS connection.
(LED Button)
Press and hold the LED button for about 1 second to turn on or off the LEDs of
your router.