User manual

5
Chapter 1
Get to Know About Your Router
1. 2. 2. The Side and Back Panel
The following parts (view from left to right) are located on the rear panel.
Item Description
Reset Button
Press and hold this button for more than 10 seconds to reset the router to its
factory default settings.
USB 3.0 Ports For connecting your USB storage device or USB printer to the router.
Internet Port For connecting to a DSL/Cable modem, or an Ethernet jack.
Ethernet Ports (1/2/3/4) For connecting your PC or other wired devices to the router.
Power On/Off Button Press this button to power on or off the router.
Power Port For connecting the router to a power socket via the provided power adapter.
1. 3. Position Your Router
• Place your router in a well-ventilated place far from any heater or heating vent.
• Avoid direct irradiation of any strong light (such as sunlight).
• Keep at least 2 inches (5 cm) of clear space around your router.
Generally, your router should be placed on a horizontal surface. It also can be mounted
on the wall as shown below.