User Manual

TC-W7960
300Mbps Wireless N DOCSIS 3.0 Cable Modem Router User Guide
Step 2: Wait for about 1 minute until the following LEDs are
solid on.

Note:
1. Keep the power on at all times during this process.
2. If the Internet LED
is blinking or off, please call your ISP’s customer service.
3. If the wireless LED
is off, please press the WiFi button on the front panel,
then check the LEDs again.
Step 3: Connect your computer to the modem router via a wired or wireless connection.
Wired: Connect the computer to the modem router’s LAN port via an Ethernet cable.
Wireless: On your computer, select and connect to the modem router’s wireless network.
The default wireless network name (SSID) and password are on the provided
Information Card.
Or you can set up a connection via the WPS button
, which is on the front
panel of the modem router. If your computer use an adapter that supports
WPS, press the WPS button on the adapter. Within 2 minutes, press the WPS
button on the modem router until the WPS LED
starts to flash quickly. The
WPS LED
will stay on for 5 minutes when a WPS connection is
established, then turns off.
Figure 2-2
2.4 Activating the Modem Router
Step 1. Get your Internet service account information and the modem router’s Information Card
ready for activating your modem router. To access the Internet, the modem router needs
to be activated.
Step 2. If your computer is configured with a fixed IP, change it to “obtain an IP address
dynamically”.
Launch a web browser, and visit any website. You will be automatically redirected to your
service provider’s self-activation page.
Follow the on-screen self-activation instructions to activate the modem router. If the
self-activation page does not show up, please call your service provider’s customer
service to activate the modem router.
7