User Manual
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting to the Network
- Chapter 3. Log into the Modem Router
- Chapter 4. Basic Configuration
- Chapter 5. Advanced Configuration
- Appendix A: Specifications
- Appendix B: Troubleshooting
TC-W7960
300Mbps Wireless N DOCSIS 3.0 Cable Modem Router User Guide
Figure 5-30
Port Filtering:
Add - You can add a new device for the Port Filtering rule by clicking button.
Delete - You can click button to delete the selected entries.
Start/End Port - Display the start port/end port that cannot access this router.
Protocol - The protocol used for this application, either TCP, UDP, or BOTH (all protocols
supported by the modem router).
Enable - Click the icon to enable the function. If this function has taken effect, the icon
will become .
Modify - If you want to delete this entry, you can click the icon.
To add an IP Address Filtering entry:
1. Click
button, then you will see a setting page.
2. Enter the Start Port and the End Port.
3. Select the Protocol which you want.
4. Check Enable this Entry for this entry, as shown in the following figure.
51