COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd. Copyright © 2006 TP-LINK Technologies Co., Ltd.
Package contents.............................................................................................................. 2 Chapter 1: Product Overview ............................................................................................ 3 1.1 Product main specification ................................................................................... 3 1.2 Supporting protocol.............................................................................................. 3 1.3 Transmit data-rate.
TD-8811 External ADSL2+ Router User Guide Package contents The following contents should be found in your box: ¾ One TD-8811 External ADSL2+ ROUTER ¾ One AC power Adapter for TD-8811 External ADSL2+ ROUTER ¾ One Resource CD for TD-8811 External ADSL2+ ROUTER, including: • This Guide • Quick installation Guide Program • Other Helpful Information • USB driver ¾ Quick installation Guide ¾ One RJ45 cable ¾ Two RJ11 cable ¾ One ADSL splitter ¾ One USB cable Note: If any of the above items are damaged or missin
TD-8811 External ADSL2+ Router User Guide Chapter 1: Product Overview TP-LINK® TD-8811 External ADSL ROUTER is the latest product designed and manufactured by TP-LINK Technologies Co., Ltd. With TP-LINK’s excellent circuit design and high quality production, we guarantee the ADSL ROUTER’s high performance, great stability and easy to use.
TD-8811 External ADSL2+ Router User Guide -Supports RFC2516 (PPPoE) -Supports RFC1483 (EoA)(Bridged *and route) -Supports RFC1577 (IPoA) NOTE. “*” Needs the third-party software. 1.3 Transmit data-rate ¾ ¾ ¾ Max download data-rate: 24Mbps Max upload data-rate: 1Mbps Max line length: 6Km 1.
TD-8811 External ADSL2+ Router User Guide Chapter 2: Hardware Installation Guide The TD-8811 maintains three separate interfaces, one Ethernet ,one USB interface and one ADSL interface. The Router should not be located where it will be exposed to moisture or excessive heat. Place the Router in a location where it can be safely connected to the various devices as well as to a power source. 2.
TD-8811 External ADSL2+ Router User Guide otherwise your ADSL2+ ROUTER may be damaged. ¾ RESET(reset default): First press the reset button of ROUTER, then turn on the ROUTER’s power for at least three seconds. It will resume the default manufacturer’s setup. ¾ LAN: Connect with your computer’s NIC. USB: Connect with your computer’s USB interface LINE(WAN): Connect to the MODEM Port of Splitter or Connecting the telephone line. ¾ ¾ 2.
TD-8811 External ADSL2+ Router User Guide Chapter 3: System Configuration 3.1 Computer Configuration 1. 2. Connect the cable according to Chapter 2, turn on the power. Change the IP address of your PC（Figure 3-1）: Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* (* is any value between 2 to 254, Net mask is 255.255.255.0, Gateway is 192.168.1.1, DNS address is the value provided by ISP).
TD-8811 External ADSL2+ Router User Guide The users of Windows 2000/NT/XP can do the following: Right-press Network Neighbor ->Choose Properties->Right-press Local Connection ->Choose Properties->Doubleclick Internet Protocol (TCP/IP). NOTE: The words in fact may be different with this guide. Remarks: you can check whether your configuration is successful through PING command. Enter Ping 192.168.1.1 If the screen looks like the following, you have been successful. Pinging 192.168.1.
TD-8811 External ADSL2+ Router User Guide You will then see the Figure 3-3. You will see some information such as link rate and so on. Figure 3-3 Default value of user name and password is “admin”; if you want to change them, please go to “Management” Æ “Access control”Æ“Passwords” changing them.
TD-8811 External ADSL2+ Router User Guide 3.3 Web Setup Choose “Advanced Setup”Æ”WAN”, you will enter the page of Wide Area Network (WAN) Setup, you will see the Figure 3-5. Figure 3-5 There are 7 PVC links in the WAN setup page, choose the fit PVC according to your needs, and then click the edit button, you will enter the page of ATM PVC Configuration (See Figure 3-6).
TD-8811 External ADSL2+ Router User Guide Enter VPI/VCI value and service category which is provided by your ISP, click next to enter the next step. You will see the figure 3-7. NOTE: The type of network protocol selected may be different in different areas, there are five types（Figure 3-7）, So you should ask your ISP to acquire the local type of network protocol and Encapsulation mode. Figure 3-7 After choosing the proper protocol, enter the correct parameters supported by your ISP .
TD-8811 External ADSL2+ Router User Guide Figure 3-8 You will see the figure 3-9. Then turn on the selected functions according to your demands. Clicking the next button to enter the next step, you will see the Figure 3-10, finally click save to complete the configuration.
TD-8811 External ADSL2+ Router User Guide Figure 3-10 ¾ PPP over Ethernet (PPPoE) If you select the protocol of PPP over Ethernet (PPPoE), you will see the figure 3-11, enter the value of user name and password which is provided by your ISP, after selecting the other function(often using the default setup), click the next button. Figure 3-11 You will see the figure 3-12. Then turn on the selected functions according to your needs.
TD-8811 External ADSL2+ Router User Guide Clicking the next button to enter the next step, you will see the Figure 3-13, finally click save to complete the configuration.
TD-8811 External ADSL2+ Router User Guide If you select the protocol of MAC Encapsulation Routing (MER), you will see the page(Figure 3-14) Enter the parameter and the way which is provided by your ISP, then click the next button. Figure 3-14 You will see the figure 3-15. Then turn on the selected functions according to your needs. Clicking the next button to enter the next step, you will see the Figure 3-16, finally click save to complete the configuration.
TD-8811 External ADSL2+ Router User Guide Figure 3-16 ¾ IP over ATM (IPoA) If you select the protocol of IP over ATM (IPoA), you will see the figure 3-17, enter the parameter and the way which is provided by your ISP, then click the next button. Figure 3-17 You will see the page (figure 3-18), then turn on the selected functions according to your needs. Clicking the next button to enter the next step, you will see the Figure 3-19, finally click save to complete the configuration.
TD-8811 External ADSL2+ Router User Guide Figure 3-18 Figure 3-19 ¾ Bridging If you select the Bridging protocol, you just open the bridge service function options, you will see the figure 3-20, then click the next button, you will see the Figure 3-21, finally press save to complete the configuration.
TD-8811 External ADSL2+ Router User Guide Figure 3-20 Figure 3-21 NOTE: After you complete the settings, the new settings must be saved and the Router must be restarted for the settings to go into effect. Please press the Save/Reboot button to restart, referring to the Figure 3-22.
TD-8811 External ADSL2+ Router User Guide Figure 3-22 NOTE: All of the above setting is under windows XP OS. 3.4 Software Dial If TD-8811 CPE work in bridged (RFC 1483 Bridged) mode when it connects Internet. You must to install dial software on your PC. There are some software working on WINDOWS in market, example for EnterNet3000、RASPPPoE、WinPeET.
TD-8811 External ADSL2+ Router User Guide 3.5 USB Configuration If you use the USB interface, First of all you must install the USB’s drive to the using computer. You can obtain the drives from the provided CD or download from our website. (http://www.tp-link.com) USB Drive installation procedures If the hardware is installed before the computer is Power On. Please turn on the computer and enter into the windows operating system, Then the operating system will identify the device.
TD-8811 External ADSL2+ Router User Guide Figure 3-24 Select the ‘search removable media(floppy, CD-ROM…)’. and click the next button You will see the figure 3-25. The driver will be search and installed. NOTE: You must insert the CD first.
TD-8811 External ADSL2+ Router User Guide Waiting and you will see the figure 3-25. The driver has finished installation, click Finish to close the installation. Please reference to chapter 3.1 to finish the IP configuration of USB network connect. Then you could use the USB device. Figure 3-26 NOTE: 1 All of the above settings are under windows XP OS. 2 If you want cut off the USB device you must disconnect the network of USB first.
TD-8811 External ADSL2+ Router User Guide Chapter 4: Advantage management setup In order to satisfy our customer's needs we offer an excellent Web management interface. Feel free to utilize the Advantage application and online software upgrades. The functions of the Web management interface are as follows: ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ Upgrade software Modify the default IP address of the port of LAN(192.168.1.
TD-8811 External ADSL2+ Router User Guide Chapter 5: FQA 1. What related parameters are required to acquire ISP when you want to access the internet by ADSL2+ ROUTER? 1) Dial user: Connection protocol, User name, Password, Value of VPI/VCI, Encapsulation mode of AAL5 and so on. 2) Static IP user: Connection protocol, WAN IP Address, Subnet Mask, Gateway, Value of VPI/VCI, Encapsulation mode of AAL5 and so on. 2.
TD-8811 External ADSL2+ Router User Guide Appendix A: Default Configuration USER NAME admin PASSWORD admin IP ADDRESS 192.168.1.
TD-8811 External ADSL2+ Router User Guide Appendix B: Contact Information For help with the installation or operation of the TP-LINK TD-8811 External ADSL2+ ROUTER, please contact us. E-mail: support@tp-link.com Website: http://www.tp-link.
