TD-8811/TD-8811B External ADSL2+ ROUTER
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2007 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Package contents The following contents should be found in your box: ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ One TD-8811/TD-8811B External ADSL2+ ROUTER One AC power Adapter for TD-8811/8811B External ADSL2+ ROUTER One Resource CD for TD-8811/TD-8811B External ADSL2+ ROUTER, including: • This User Guide • Quick installation Guide Program • Other Helpful Information • USB driver Quick installation Guide One RJ45 cable Two RJ11 cable One ADSL splitter (only available for TD-8811) One USB cable ) Note: If any of the above
COMMENT Chapter 1. Product Overview ....................................................................1 1.1 Product main specification .............................................................................1 1.2 Supporting protocol ........................................................................................1 1.3 Transmit data-rate ..........................................................................................2 1.4 ATM property..........................................
TD-8811/8811B External ADSL2+ ROUTER Chapter 1. Product Overview The TP-LINK TD-8811/TD-8811B External ADSL2+ ROUTER is the latest product designed and manufactured by TP-LINK TECHNOLOGIES CO., LTD. With TP-LINK’s excellent circuit design and high quality production, we guarantee its high performance, great stability and easy to use. The TD-8811/TD-8811B is a complete plug-and-play solution.
TD-8811/8811B 1.3 Transmit data-rate ¾ Max download data-rate: 24Mbps ¾ Max upload data-rate: 1Mbps ¾ Max line length: 6Km 1.4 External ADSL2+ ROUTER ATM property ¾ AAL0, AAL5, OAM, RM, and raw cell types supported ¾ Direct hardware support for 4 Receive VCs, with additional RX VCs and TX VCs supported in software ¾ 1.5 Full 24-bit Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) System support ¾ Support PVC ¾ Support NAT、DHCP and so on ¾ Support IEEE 802.
TD-8811/8811B External ADSL2+ ROUTER Chapter 2. Hardware Installation Guide The TD-8811/TD-8811B maintains three separate interfaces, one Ethernet, one USB interface and one ADSL interface. The Router should not be located where it will be exposed to moisture or excessive heat. Place the Router in a location where it can be safely connected to the various devices as well as to a power source. 2.
TD-8811/8811B 2.3 External ADSL2+ ROUTER Rear-panel ¾ ON/OFF: Turn on/off the ADSL2+ Router’s power. ¾ POWER (9VAC/0.8A input): please do not use any unknown power adapter, otherwise your ADSL2+ Router may be damaged. ¾ RESET (reset default): Press the reset button, then turn on the Router's power (keep the button pressed) for at least three seconds, it will restore the settings to the default factory configuration. ¾ LAN: Connect with your computer’s NIC.
TD-8811/8811B External ADSL2+ ROUTER Figure 2-1 Chapter 3. System Configuration 3.1 Computer Configuration 1. Connect the cable according to Chapter 2, turn on the power. 2. Change the IP address of your PC（Figure 3-1）: Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* (* is any value between 2 to 254, Network mask is 255.255.255.0, Gateway is 192.168.1.1, DNS address is the value provided by ISP).
TD-8811/8811B External ADSL2+ ROUTER Figure 3-1 ) Note: 1) 2) 3) Users of Windows 98 can open TCP/IP Properties according to the following: Right-click (Mouse) Network Neighbor -> Choose Properties -> Double-click TCP/IP PCI Fast Ethernet Adapter. The users of Windows 2000/NT/XP can do the following: Right-press Network Neighbor ->Choose Properties->Right-press Local Connection ->Choose Properties->Double- click Internet Protocol (TCP/IP). The words may be different with this guide in fact.
TD-8811/8811B External ADSL2+ ROUTER Figure 3-2 If the screen looks like the following, the connection fails. Repeat the previous steps again. Figure 3-3 3.2 Login Startup Internet Explorer, and enter 192.168.1.1, then enter default user name(admin) 、 password(admin), When ADSL2+ connection is OK, you will see the Figure 3-4.
TD-8811/8811B External ADSL2+ ROUTER Figure 3-4 You will then see the Figure 3-5. This screen displays some information about the device such as link rate.
TD-8811/8811B External ADSL2+ ROUTER “Management” Æ “Access control”Æ“Passwords”. (Figure 3-6) Figure 3-6 3.3 Web Setup Choose “Advanced Setup”Æ”WAN”, you will enter the page of Wide Area Network (WAN) Setup, you will see the Figure 3-7. Figure 3-7 There are 7 PVC links in the WAN setup page, choose the right PVC according to your needs, and then click the edit button, you will enter the page of ATM PVC Configuration (See Figure 3-8).
TD-8811/8811B External ADSL2+ ROUTER Figure 3-8 Enter VPI/VCI value and service category which is provided by your ISP, click next to enter the next step. You will see the Figure 3-9. ) Note: The type of network protocol selected may be different in different areas, there are five types （Figure 3-9）, so you should ask your ISP to acquire the local type of network protocol and Encapsulation mode. Figure 3-9 After choosing the proper protocol, enter the correct parameters supported by your ISP.
TD-8811/8811B External ADSL2+ ROUTER of user name and password which is provided by your ISP, after selecting other functions (often using the default setup), click the next button. Figure 3-10 After that, the Figure 3-11 will appear. Turn on the selected functions according to your demands. Clicking the next button to enter the next step, you will see the Figure 3-12, finally click save to complete the configuration.
TD-8811/8811B External ADSL2+ ROUTER Figure 3-12 ¾ PPP over Ethernet (PPPoE) If you select the protocol of PPP over Ethernet (PPPoE), you will see the Figure 3-13, enter the value of user name and password which is provided by your ISP, after selecting other functions (often using the default setup), click the next button. Figure 3-13 You will see the Figure 3-14. Then turn on the selected functions according to your needs.
TD-8811/8811B External ADSL2+ ROUTER Figure 3-14 Figure 3-15 ¾ MAC Encapsulation Routing (MER) If you select the protocol of MAC Encapsulation Routing (MER), you will see the page (Figure 3-16). Enter the parameter and the way which is provided by your ISP, then click the next button.
TD-8811/8811B External ADSL2+ ROUTER Figure 3-16 After that, Figure 3-17 will be available. You can select the functions according to your needs. Clicking the next button to enter the next step, you will see the Figure 3-18, finally click save to complete the configuration.
TD-8811/8811B External ADSL2+ ROUTER Figure 3-18 ¾ IP over ATM (IPoA) If you select the protocol of IP over ATM (IPoA), the Figure 3-19 will display, enter the parameter and the way which is provided by your ISP, then click the next button. Figure 3-19 You will see the page (Figure 3-20), then turn on the selected functions according to your needs. Clicking the next button to enter the next step, you will see the Figure 3-21, finally click save to complete the configuration.
TD-8811/8811B External ADSL2+ ROUTER Figure 3-20 Figure 3-21 ¾ Bridging If you select the Bridging protocol, you just open the bridge service function options, you will see the Figure 3-22, then click the next button, you will see the Figure 3-23, press save to complete the configuration finally.
TD-8811/8811B External ADSL2+ ROUTER Figure 3-22 Figure 3-23 ) Note: After you complete the settings, the new settings must be saved and the Router must be restarted for the settings to take effect. Please press the Save/Reboot button on the Figure 3-24 to restart.
TD-8811/8811B External ADSL2+ ROUTER Figure 3-24 ) Note: All of the above setting is under windows XP OS. 3.4 Software Dial If TD-8811/TD-8811B CPE work in bridged (RFC 1483 Bridged) mode when it connects Internet. You must install dial software on your PC. There are some software working on Windows in market, example for EnterNet3000, RASPPPoE and WinPeET.
TD-8811/8811B 3.5 External ADSL2+ ROUTER USB Configuration If you use the USB interface, First, you must install the USB’s drive to the computer. You can obtain the drives from the provided CD or download from our website. (http://www.tp-link.com) USB Drive installation procedures If the hardware is installed before the computer is Power On. Please turn on the computer and enter the operating system, Then the operating system will identify the device.
TD-8811/8811B External ADSL2+ ROUTER Figure 3-26 Select the ‘search removable media(floppy, CD-ROM…)’ and click the next button, then Figure 3-27 is available. The driver will be searched and installed. ) Note: You must insert the CD first.
TD-8811/8811B External ADSL2+ ROUTER After that, you will see the Figure 3-28. The installation completes, click Finish to close the installation. Please refer to chapter 3.1 to finish the IP configuration for USB connect. Then you could use the USB device. Figure 3-28 ) Note: 1) 2) All of the above settings are under windows XP. If you want to pull out the USB device you must disconnect the network of USB first.
TD-8811/8811B External ADSL2+ ROUTER Chapter 4: Advantage management setup In order to satisfy our customer's needs, we offer an excellent Web management interface. Feel free to utilize the Advantage application and online software upgrades. The functions of the Web management interface are as follows: ¾ Upgrade software ¾ Modify the default IP address of the port of LAN(192.168.1.
TD-8811/8811B External ADSL2+ ROUTER Appendix A: FQA 1. What related parameters are required to acquire ISP when you want to access the internet by ADSL2+ ROUTER? 1) Dial user: Connection protocol, User name, Password, Value of VPI/VCI, Encapsulation mode of AAL5 and so on. 2) Static IP user: Connection protocol, WAN IP Address, Subnet Mask, Gateway, Value of VPI/VCI, Encapsulation mode of AAL5 and so on. 2. About Connection protocol, VCI/VPI, Encapsulation mode of AAL5 1) 2) 3) 3.
TD-8811/8811B External ADSL2+ ROUTER Appendix B: Default Configuration USER NAME admin PASSWORD admin IP ADDRESS 192.168.1.
TD-8811/8811B External ADSL2+ ROUTER Appendix C: Contact Information For more help with the installation or operation of the TP-LINK TD-8811/TD-8811B External ADSL2+ ROUTER, please contact us. Website: http://www.tp-link.
