Installation Instructions

TD-W8960N
Connecting the Hardware
Wi-Fi
On
Power
On
ADSL
On
4
Quick Installation Guide
ADSL Splitter
Phone Jack
Power Adapter
Modem Router
2 Connect the modem router to
the ADSL splitter.
3
1 Connect the ADSL splitter to
the phone jack.
PHONE MODEM
LINE
ADSL
300Mbps Wireless N ADSL2+ Modem Router
If you don’t need the phone service, just skip step 1 and
directly connect the modem router to the phone jack with a
phone cable, then follow steps 3 and 4 to complete the
hardware connection.
Verify that the hardware connection
is correct by checking these LEDs.
Connect the power adapter to the
modem router and push in to turn
on the modem router.
Connect to the phone (Optional)
Notes:
1) The ADSL LED takes about 1 to 2 minutes to
stabilize.
2) If the Wi-Fi LED is off, please press the WiFi
button on the rear panel for 2 seconds, then the
LED should turn stable in a few seconds.