User Guide

TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-32
To add a new DMZ Host:
You can enter the computer's IP address and then click Save/Apply to activate the DMZ host you
set on this page.
)
Note:
DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must
have its DHCP client function disabled and should have a new static IP Address assigned to it
because its IP Address may change while using the DHCP function.
4.4.6.4 ALG
Choose “Advanced Setup”Æ“NAT”Æ“ALG”, and then you can configure the basic security in the
screen as shown in Figure 4-33.
Figure 4-33
Click the Save/Apply button to save your settings.
4.4.7 Security
Choose “Advanced Setup”Æ“Security”, and you will see the security screen including IP
Filtering and MAC Filtering (only effective in Bridging mode) submenus.
4.4.7.1 IP Filtering
The IP address filtering feature makes it possible for administrators to control user's access to the
Internet, which is based on user's IP. The IP address filtering here means Outgoing, the detailed
descriptions are provided below.
40