User Guide

TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide

4.4.12.1 DNS Server

Choose “Advanced Setup”Æ“DNS”Æ“DNS Server”, and you can see the DNS Server

Configuration screen as shown in Figure 4-55.

Figure 4-55

For PPPoA, PPPoE enabled PVC(s), please select the Select DNS Server Interface from

available WAN interfaces checkbox, this modem router will accept automatically the first

received DNS assignment from the selected configured WAN interface during the connection

establishment.

For single PVC with IPoA, static IPoE protocol, please select the Use the following Static DNS IP

address checkbox, and enter the primary and /or optional secondary DNS server IP addresses

provided by your ISP.

Here you can also select a configured WAN interface for IPv6 DNS server or enter the static IPv6

DNS server Addresses provided by your ISP.

Click the Save/ Apply button to save the new configuration.

4.4.12.2 Dynamic DNS

Choose “Advanced Setup”Æ“DNS”Æ“Dynamic DNS”, you can see the Dynamic DNS screen,

this screen allows you to configure the Dynamic DNS (shown in Figure 4-56).

The modem router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you

assign a fixed host and domain name to a dynamic Internet IP Address. The Dynamic DNS service

allows you to alias a dynamic IP address to a static hostname in any of the many domains,

allowing your modem router to be more easily accessed from various locations on the Internet.