User manual

Physical Description
1
Quick Installation Guide
MODEL NO. TL-ER604W
Package Contents
QIG
MODEL NO. TL-ER604W
Resource CD
Ethernet Cable
Hardware Connection
2
Connect the WAN port of the Router to the Cable or DSL
Modem via Ethernet cable.
• Front Panel
• Back Panel
• LED Descriptions
SYS
PWR
Name Status
WAN, LAN
Indication
On (Green)
The Router is powered o
On/O
Flashing (Green)
The Router has a hardware error
The Router works properly
PC Conguration
3
Internet Protocol
Select “Internet Protocol (TCP/IP) ” ”/“
Version 4 (TCP/IPv4)” and click “ Properties
”.
2
2
3
For Windows 7/Vista
For Windows XP/2000
For Windows 7/Vista
1
1
Connect one end of the AC power cord to the AC power socket
on the Router, and the other end into an electrical outlet. The
Router will work automatically and the LED will display as the
LED Descriptions shown.
Connect a LAN port of the Router to the computer by
Ethernet cable.
The Router is powered on
O
Power Cord
Here we take the ADSL Modem
Internet
12
3
The provided power cord may differ from the gure above
due to local power specications.
On
(Green/Yellow)
Flashing
(Green/Yellow)
There is no device linked to the corresponding portO
For Windows XP/2000
3
Select “Obtain an IP address automatically ” and “Obtain
server address automatically ”. Then click “OK”.
DNS
TD-8816
TP-LINK as an example.from
TL-ER604W
Wireless N Gigabit Broadband VPN Router
Wall Socket
Here we take Wireless Network Connection as an example. Please make sure your PC supports wireless connection. You can also go to
Local Area Connection to congure the PC for wired network connection, and then go to Step 5 to congure the router.
For Windows Vista/7 : Go to Start Control Panel View
network status and tasks Manage network connection.
Right click Wireless Network Connection, and select
Properties.
There is a device linked to the corresponding port but not active (Green light indicates the linked
device is running at 1000Mbps, and yellow indicates the linked device is running at 10/100Mbps.)
The corresponding port is transmitting or receiving data (Green light indicates the linked device
is running at 1000Mbps, and yellow indicates the linked device is running at 10/100Mbps.)
WLAN
On (Green)
O
Flashing (Green)
The Wireless function is enabled
The Wireless function is disabled
There is data being transferred through wireless
For Windows XP/2000 : Go to Start Control Panel Network
Connections. Right click Wireless Network Connection, and
select Properties.
Wireless N Gigabit Broadband VPN Router
7106504096 REV1.0.0
7106504096_TL-ER604W_QIG_V1.pdf 1 2013-1-23 10:48:34