User Guide TL-MC1400 14-Slot Rackmount Chassis Rev: 1.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2009 TP-LINK TECHNOLOGIES CO., LTD.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class A product.
Package Contents The following items should be found in your box: ¾ One TL-MC1400 14-Slot Rackmount Chassis ¾ One AC Power Cord (used for the power supply of 110V/220V) ¾ Fourteen retainer-plates (equipped with locking knobs) ¾ This User Guide Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor.
CONTENTS Chapter 1. Introduction of the Product............................. 1 1.1 Overview of the Product..................................... 1 1.2 Features ............................................................. 1 1.3 Basic Requirements ........................................... 2 Chapter 2. Identifying External Components................... 3 2.1 Front Panel ........................................................ 3 2.2 Rear Panel .....................................................
Chapter 1. Introduction of the Product Thank you for choosing the TL-MC1400 14-Slot Rackmount Chassis. 1.1 Overview of the Product The TL-MC1400 14-Slot Rackmount Chassis is specially designed for accommodating and managing the MC series Cassette Media Converters. It is a standard 19-inch 2U height rack-mount chassis which can be suitably mounted in the standard 19-inch rack.
¾ Adopts the passive-backplane architecture and ensures the steady power input for each media converter ¾ Supports TP-LINK full line of media converters 1.3 Basic Requirements ¾ Place the chassis in a well ventilated dry place. ¾ Ensure the chassis is electrically connected to ground. ¾ Avoid directly looking towards the output port of the light modules when the Media Converter is powered on, otherwise it may cause injury to your eyes.
Chapter 2. Identifying External Components This Chapter describes the front panel and the rear panel of the TL-MC1400 chassis. 2.1 Front Panel 2.2 Rear Panel )Note: An optional AC or DC power supply is available for installation in the optional power supply position of the chassis.
Chapter 3. Installation 3.1 Installing the Media Converters in the Chassis To install the media converters in the TL-MC1400 chassis, please follow the steps: 1) Firstly, tweak out the two screws on the side near the switch of the media converter. Then install the retainer-plate (provided with the chassis) to the media converter using the screws you just removed from the media converter.
3.2 Mounting the Chassis in the Rack The dimension of the TL-MC1400 chassis is designed according to the standard 19-inch rack-mountable steel case of Electronic Industries Association. Power off the chassis before mounting it in the rack, and then fasten it to the rack with screws through the holes of the “L” brackets on each side. 3.
)Note: The Ground Point (marked with ) of the chassis is located on the lower left corner of the rear panel. 2) Connect the chassis to the power Please connect the Chassis’s power plug to the AC outlet with the provided power cord as the following figure. Then you can control the power by the switch identified with “On” and “Off”. )Note: The LED will indicate the working status of the Chassis. A steady light of the LED indicates the Chassis works properly.
Appendix A: Specifications Environmental and Physical Input: 100-240V~ 50/60Hz 3.0A (Max) AC power supply Output: +9.5VDC, 9.5A (Max) Vripple: ≤50mv Noise: ≤100mv Operating Temperature 0°C - 40°C (32℉~104℉) Storage Temperature -40°C - 70°C (-40℉~158℉) Operating Humidity 10%~90% non-condensing Storage Humidity 5%~90% non-condensing Dimensions (W×D×H) Weight 19.0x14.1x3.4in.
Appendix B: The Product List of MC Series The Chassis can accommodate 14 Cassette Media Converters of MC series. The detailed types of MC series Cassette Media Converters are listed as below.
