Instructions

4
Chapter 1
Get to Know About Your Router
LED Status Indication
WPS/RESET
On
WPS connection has been established.
Flashing
WPS connection is being established.
Off
No WPS connection is established.
Port and Button Description
Item Description
Mode Switch
This switch is used to determine the operation mode of the router.
WAN/LAN Port
LAN: 3G/4G (3G/4G Router), WISP, Access Point, Repeater/Bridge
WAN: 3G/4G (3G/4G Router Mode With Ewan Backup, Wireless Router Mode,
Wireless Router Mode With 3G/4G Backup)
Power Port
This port is used to connect to the power adapter.
WPS/RESET Button
To establish WPS connection, press the WPS button on your device and then
press the WPS/RESET button on this router.
To reset the router, press and hold this button until all the LEDs turn on and then
release it.
3G/4G USB Port
This port is used to plug a 3G/4G USB modem into.