User Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Set Up Internet Connection Via Quick Setup Wizard
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN
- Customize Your Network Settings
- Manage the Router
- FAQ
7
Chapter 2
Connect the Hardware
1. Switch the operation mode to 3G/4G and connect the hardware according to Step A
to D.
2. Connect your device to the router wirelessly. The SSID (wireless network name) and
password are on the router’s label.
B
C
D
Internet
A
2. 2. 3. WISP Client Router Mode
In WISP Client Router mode, the router enables multiple users to share internet
connection from WISP.
1. Switch the operation mode to
WISP and connect the hardware according to Step A
and B.
2. Connect your device to the router wirelessly or via an Ethernet cable. The SSID
(wireless network name) and password are on the router’s label.
WISP
A
B