User Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Set Up Internet Connection Via Quick Setup Wizard
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN
- Customize Your Network Settings
- Manage the Router
- FAQ
33
Chapter 7
Network Security
7. 2. Service Filtering
Service Filtering is used to prevent certain users from accessing a specific service. It
can even block a user from accessing the internet.
1. Visit
http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced > Security > Service Filtering.
3. Enable
Service Filtering.
4. Click Add.
5. Select a service type from the drop-down list and the corresponding parameters will
be automatically filled in. Select Custom if your desired service type is not listed and
enter the corresponding parameters.
6. Specify the IP address(es) this filtering rule will be applied to.
7. Click
Save.
7. 3. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).