User Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Set Up Internet Connection Via Quick Setup Wizard
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN
- Customize Your Network Settings
- Manage the Router
- FAQ
34
Chapter 7
Network Security
Block or allow specific client devices to access my network (via
wired or wireless).
1. Visit
http://tplinkwifi.net, and log in with the password you
set for the router.
2. Go to
Advanced > Security > Access Control or Settings >
Security > Access Control.
3. Enable
Access Control.
4. Select the access mode to either block (recommended) or
allow the device(s) in the list.
To block specific device(s):
1 ) Select
Blacklist and click Save.
2 ) Select the device(s) to be blocked in the Online Devices
table by ticking the checkbox(es).
3 ) Click Block above the Online Devices table. The selected
devices will be added to
Devices in Blacklist automatically.
To allow specific device(s):
1 ) Select Whitelist and click Save.
2 ) Click Add in the Devices in Whitelist section. Enter the
Device Name and MAC Address (You can copy and paste
I want to:
How can I
do that?