User Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Set Up Internet Connection Via Quick Setup Wizard
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN
- Customize Your Network Settings
- Manage the Router
- FAQ
44
Chapter 9
VPN
With IPSec VPN, you can access the network securely when out of home. To use the VPN
Service, you need to configure Dynamic DNS Service or assign a static IP address for
the router’s WAN port. And the System Time should be synchronized with the internet.
1. Visit
http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced > VPN > IPSec VPN.
3. Enable
Dead Peer Detection.
4. Click Add and enter correspond parameters.
• IPSec Connection Name: Enter a name for the IPSec VPN connection.
• Remote IPSec Gateway (URL): Enter the destination gateway IP address which is the
public WAN IP or domain name of the remote VPN server endpoint.