User Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Set Up Internet Connection Via Quick Setup Wizard
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN
- Customize Your Network Settings
- Manage the Router
- FAQ
48
Chapter 10
Customize Your Network Settings
¾ To specify the IP address that the router assigns:
1. Enable DHCP Server.
2. Enter the starting and ending IP addresses in the
IP Address Pool.
3. Enter other parameters if the ISP offers. The
Default Gateway is automatically filled in
and is the same as the LAN IP address of the router.
4. Click
Save.
¾ To reserve an IP address for a specified client device:
1. Click
Add in the Address Reservation section.
2. Click Scan to find a connected device you want to apply this rule to. You can also
maunally enter the MAC address of the device if it’s currently disconnected from the
router.
3. Enter the
IP address to reserve for the client device.
4. Tick the Enable This Entry checkbox and click Save.