User Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Set Up Internet Connection Via Quick Setup Wizard
- Guest Network
- Parental Controls
- Bandwidth Control
- Network Security
- NAT Forwarding
- VPN
- Customize Your Network Settings
- Manage the Router
- FAQ
53
Chapter 10
Customize Your Network Settings
4. Select the host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
• Move the router closer to your host router, and click Refresh in the top-right corner of the list.
• You can manually enter the SSID (network name) and password of the network you want to extend, and click Save.
5. Once a host network is selected, its SSID, MAC address and security type will be
automatically filled in. If it’s encrypted, enter the password in the
Password field.
6. Click
Save.
10. 7. Use WPS for Wireless Connection
Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected
Wi-Fi connection.
1. Visit
http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced > Wireless > WPS or Settings > Wireless > WPS.
10. 7. 1. Use the WPS Wizard for Wi-Fi Connections
1. Click the Start WPS button on the screen. Within two minutes, press the WPS button
on the client device.